Complete system for inductive ESPHome sensor with Wi-Fi for RF1c gas meter

• Fully assembled and tested
• No additional components need to be purchased
• ESPHome configuration with integration into Home Assistant (unique identifier, one-time API key) installed, the starting value can be changed via Home Assistant
• You can also install your own firmware like Tasmota (via USB or OTA over Wi-Fi)
• Largely elegant and tidy appearance, matte plastic
• Dust-proof, partially splash-proof
• Measure, analyze and display gas consumption with ESPHome, Home Assistant, Loxone, openHAB, AWS, Grafana
• Find gas waste - reduce gas consumption - lower costs

ASSEMBLY

• The lock nut is screwed onto the sensor.
• The washer is placed onto the sensor.
• The adapter is screwed onto the sensor until the blue sensor head is flush with the adapter.
• The sensor is secured against twisting with the lock nut.
• The adapter is inserted into the designated guide on the right side of the meter and the locking pin is inserted into the corresponding recess on the left side.
• By turning the knurled cap, the locking pin is recessed into the cavity.
• The included clip can be attached to pipes to provide a secure hold for the electronics.
• You do not need any tools or additional mounting material.

SCOPE OF DELIVERY

• Electronics with sensor
• Mechanical adapter for gas meter
• Lock nut M18/1
• Washer M18
• Pipe clip for mounting the capsule to 1" (33.6 mm) pipes
• Printout of the installed ESPHome configuration
• Instructions for integration into WLAN and Home Assistant